Salisbury 110 rear Drum to Disc Brake conversion kit

Description

Salisbury 110 rear Drum to Disc Brake conversion kit

Here at LOF we often get asked about converting drum brake rear axles to Discs, on the 90″ Defenders it is more cost effective to swap out the whole axle, but on the Salisbury 110″ rear axle, where customers want to keep originality and the Strength of a Salisbury, we have put together a kit which is ‘Bolt On’ To convert the axle.

After installing this kit the only part left of the original axle will be the Axle Tube and the Diff- you will end up with brand new axle ends!

What is included in the kit?

• LOF POWERspec 110 rear brake kit (Discs, Pads, Fitting kit etc) (RRP £155)
• 110 Calipers installed with Stainless steel Pistons  (RRP £265)
• Full set of Timken wheel bearings
• Drum to Disc Conversion brackets x2
• New wheel hubs with studs x2
• New stub axles x2
• New brake shields x2
• New brake shield Brackets x2
• New half shafts x2
• New Drive flanges x2
• New Bolts all round

If you would like any help feel free to get in touch!

Additional information